Network Cable Tracker, PoE Tester for CAT5e/CAT6/CAT6a, Wire Checker with NCV, Identify PSE Standards, Test Physical Status for STP UTP LAN Cable, Detect AC Voltage Presence 50V-1000V


Network Cable Tracker, PoE Tester for CAT5e/CAT6/CAT6a, Wire Checker with NCV, Identify PSE Standards, Test Physical Status for STP UTP LAN Cable, Detect AC Voltage Presence 50V-1000V




Features
  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard).
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m.
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
  • NOYAFA NF-8209 Advanced Network Cable Tester Multifunction Wire Tracker with PoE Testing, NCV Function. for LAN CAT5 CAT6 Tracker Network Scan Tool(Batteries not Included)





    Features
  • A new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode.
  • It includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
  • Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
  • Measure cable length and locate fault distance accurately for lan cable. the range is 120m.That means it's equipped with the most powerful cable location technologies for any work environment.
  • Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
  • Advanced Cable Tester with PoE Multifunction Wire Tracker Network Cable Tester for te Toner Tool Kit with Bag Probe Audio Tone for LAN CAT5 CAT6 Tracker Underground Telephone Line Finder Home Repair





    Features
  • Main Function : Detecting PoE voltage, current, power, PSE standards Power supply modes, Verify RJ45 cables
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable.
  • 3. Measure cable length accurately , the range is 200m.
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)
  • NOYAFA Network Cable Tester,AT278 TDR Multi-functional LCD Tracker For RJ45, RJ11, BNC, Metal Cable,PING/POE NF-8601S





    Features
  • Fault distance: Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts.
  • PoE & PING: PoE: identify PoE presence and detect how much voltage. PING: to test network performance, data packet, min & max time.
  • AC Filter: Tone trace cable with complete AC Interference Rejection, available on common switch & PoE Switch, much stronger than other tracers on markets.
  • Hub blink: To locate network port by the flashing port light on a server/switch/hub/router port.
  • Addtional Benefits: TF card included to export data to PC ++Voltage detector: included in receiver (90-1000V) ++Rechargeable Lithium battery for more efficient work.
  • KOLSOL Network Cable Tester, PoE Tester with NCV & Lamp for CAT5e/CAT6/CAT6a, Detect PoE Voltage PSE Standards Measure Cable Fault Distance by TDR Function NF-8209





    Features
  • 🔎【Digital cable scanning】NF-8209 is a new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode.
  • 🔎【Fault distance location】Measure cable length and locate fault distance accurately for lan cable. the range is 200m.That means it's equipped with the most powerful cable location technologies for any work environment.
  • 🔎【Multi Function】It includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
  • 🔎【PoE information testing & Hub blink】 Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
  • 🔎【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).
  • Network Cable Tester NF-8209 Wire Tracker Network Tool Scan Cable Wiremap Tester CAT5 CAT6 Cable Length Measurement, PoE Testing, NCV Function





    Features
  • [Network cable scanning] Three scan modes selectable: Digital model/ Analog mode/ PoE mode.
  • [Cable continuity testing] Test physical status for STP, UTP lan cable.
  • [Cable length measurement] Measure cable length and locate fault distance accurately for lan cable.The cable type is CAT5e,CAT6,CAT6a(STP&UTP). The test range must be 2.5m~200m.
  • [PoE Testing & Port Flash] Test the information of PoE device, such as PoE voltage, power supply polarity, power supply mode. It can also identify which the type of PSE (at/af standard) If it is standard PoE device. If it is no-standard PoE device, it only display “non-standard”. Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
  • [Non-contact voltage detecting] Detect AC voltage presence (50V-1000V). You can press the "Power/Set" button on the receiver, if the "NCV”indicator is light on, then you can use the receiver to detect AC voltage presence.
  • Network Cable Tester, AT226-C NF-8601W LAN Ethernet Cable Tester RJ45 UTP STP Diagnose Tone Tracer Network Cable Length Tester for RJ45, RJ11, BNC, PING/POE 8 Identifier Telephone Wire Tracker





    Features
  • 【 PoE Function】 Identify which pins are providing power and detect how much voltage.
  • 【 PING Function】To test network performance, data packet, min & max time.
  • 【 AC Filter 】Tone trace cable with complete AC Interference Rejection.
  • 【 Hub Blink 】Hub blink for locating network port by the flashing port light on Hub / Switch.
  • 【 TF Function】 To import and export data from comupter (160 sets, txt format).
  • NOYAFA Poe Advanced Cable Tester with PoE Multifunction Wire Tracker Network Cable Tester for te Toner Tool Kit with Bag Probe Audio Tone for LAN CAT5 CAT6 Tracker





    Features
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable.
  • 3. Measure cable length accurately , the range is 120m.
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)
  • Network Cable Tester RockyMars NF8209, Wire Tracker with PoE Testing, Port Flash, Cable scan, Length Measurement, and Continuity Testing Function for CAT5e/CAT6/CAT6a, LCD Display





    Features
  • Main Function: Continuity testing, Length measurement, Cable scan, PoE test, Port flash.
  • Three Scan Modes: Digital mode, Analog mode, PoE mode. It can shield the interference of digital signals without noise which can assist you to locate the line easier.
  • Length Measurement: With TDR, it can be used to measure the length of CAT5 and CAT6 cables and locate issue distance accurately for LAN cable. The measurement range is 2.5m~200m.
  • PoE Test and Hub Blink: Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard). POE Test Range: test the information of the DC5~60V standard / non-standard PoE device. Withstand voltage design of 60V DC voltage, no longer afraid of burning cables. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
  • Continuity Testing and NCV Detecting: Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP Lan cable.
  • Network Cable Tester, Network Tester with TDR, Network Toner Tester with AC Filter, AT278 Multi-Functional Wire Tracker for RJ45, RJ11, BNC, Metal Cable, PING/POE





    Features
  • ⏩【Fault Distance Measurement】Our Network Cable Tester utilises TDR theory to accurately measure cable length with visual length graphics and provide distance to fault information. Display graphical wire mapping, opens, shorts. BUT PLEASE NOTE: our device works by TDR theory, which is mainly to test long cables. If cable is <20m, it will display cable is too short or open. Thus, when measure length, pls try a long cable, for other functions, short cables are acceptable. pls kindly notice this.
  • ⏩【POE Testing】AT278 Network Cable Tester can detect Ethernet network for POE(Power over Ethernet) existence and to know which pins are providing power and detect how much voltage.
  • ⏩【PING Function 】AT278 Cable Tester is designed for testing network performance, data packet, min & max time. Test the reachability of a host on an Internet Protocol(IP) network. It reports errors, packet lost, and a statistical summary of the results, including the minimum, maximum, the mean round-trip times.
  • ⏩【AC Filter】Trace cables with AC fliter, quickly find the targeted cable without AC noise. Available on common switch & PoE Switch. Also, it is safe to find cable in standard types of PoE switches, which won't burn out the device.
  • ⏩【Aditional Highlights】Come with TF card included to export data to PC; Voltage detector: included in receiver (90-1000V); Rechargeable Lithium battery for more efficient work. Low voltge alarm function and automatic delay power on-off. Big LCD color screen 320*240 and lighting lamp in darkness. Hub blink to locate network port by the flashing port light on a server/switch/hub/router port.